Selecting The Correct Venturo Crane

Three Steps to Help Determine What Venturo Crane Best Fits a Given Situation:

Determine What Size of Crane is Needed based on Foot Pound Rating required.

• Foot Pound Rating — based on Foot Pound Rating required. To find out what the foot pound rating should be —find out the weight of the max load that will be lifted & what would be the max distance that load will be moved away from the center line of the crane—Using those two numbers you can determine Foot Pound Rating by multiplying those numbers together — the resulting number would be the foot pound rating of the size of the crane needed.

• Note: Venturo HT and ET cranes are numbered in Foot Pound Ratings—ie—ET12 is 12,000 foot pound crane / HT25 is a 25,000 foot pound crane / HT50 is 50,000 foot pound rated crane; etc.

Example 1: Max weight to be lifted is 5000 lbs. The crane has to take 5000 lbs. a distance of 10’ away from the center line of the crane. 5000 lbs. x 10 feet would be 50,000 which would mean a 50,000 foot pound rated crane is needed which would be a Venturo HT50.
Example 2: Max weight to be lifted is 1390 lbs. The crane has to take 1390 lbs. a distance of 8’ away from the center line of the crane. 1390 lbs. x 8 feet would mean a 11,120 is needed which would mean a 12,000 foot pound crane is needed, so an ET12 would work in this application.

Example 3: Max weight to be lifted is 2100 lbs. The crane has to take 2100 lbs. a distance of 11’ away from the center line of the crane. 2100 lbs. x 11 feet would mean a 23,100 foot pound rated crane is needed which would mean an ET25 or HT25 would fit this application.
Some HT & ET models have the same max lifting capacity ratings:

HT25 & ET25 — max lifting capacity of 5000 lbs. @ 5 feet from the center line of the crane.

HT30 & ET30 — max lifting capacity of 5000 lbs. @ 6 feet from the center line of the crane.

HT40 & ET36 — max lifting capacity of 6000 lbs. @ 6 feet from the center line of the crane.

What type of crane to use—a “fully hydraulic”— the Venturo HT family of cranes or an “electric-hydraulic” the Venturo ET family of cranes would be determined by the how often the crane is used and what the end user is picking up.

FMVSS 111 Explained with 2018 Updates | NTEA 2018

FMVSS (Federal Motor Vehicle Safety Standards) 111 is a law coming into full effect on May 1st 2018 which requires a minimum view behind a vehicle which has a gross weight of 10,000 pounds or lower. Watch to learn all the details involved and how backup cameras can help your vehicle be compliant with this new regulation.

Enoven Truck Body offers the full lineup of Boss Snow Plows and Spreaders

 

We can upfit your existing vehicle or build out a full ready to work snow plow vehicle with spreaders and all.

Take a look at the product catalog from the Boss Brochure: http://enovenind.com/wp-content/uploads/2017truck-equipment-brochure.pdf

 Call us today for a quote.

 (916) 372-9692

Enoven Truck Body and Equipment
 2904 Duluth Street
W. Sacramento, CA 95691

Our New Shop!

We have a new shop and manufacturing facility located in Redding, CA.
The shop address is 4680 Caterpillar Road. Redding, CA . Come check it out!

VMAC G30 SOLVES COMMON AIR COMPRESSOR CHALLENGES

To celebrate the recent launch of the VMAC G30 Gas Engine Driven Air Compressor, now powered by Honda, VMAC ran a G30 Giveaway Contest. (Watch the video on our Facebook page!) In this contest we asked entrants to answer three simple questions. One of these questions asked fleet managers and operators what their top challenges with their current truck-mounted air compressors are. Here are the results:

Common Air Compressor Challenges

With seven options to choose from, the top three results were size, air output and weight, accounting for almost 60% of the responses. The VMAC G30 was designed and engineered to address the concerns fleet managers and operators have with their current equipment.

SIZE

VMAC G30 Gas Drive Air CompressorAir compressor size was the number one challenge our survey identified. The VMAC G30 is 50% smaller* than other competitive air compressors, measuring just 34” (l) x 21.5” (w) x 24” (h), making it small enough to fit on the side pack of a single rear wheel service body. The compact size frees up to 15 cubic feet on the truck body, and leaves more room in the back of the truck for supplies, tools, and equipment. Another bonus is that visibility is improved, as the short height of the G30 means it won’t obstruct the view in the rear window.

AIR OUTPUT

Not only is the G30 compact, it is also powerful—50% more powerful* than other competitive air compressors. Producing 30 CFM 100% of the time, the G30 can operate at 100% duty cycle, which means you won’t have to wait for air to build, and you can work without interruption, thanks to continuous air supply. The G30 doesn’t need a large air receiver tank either, which aids in the size challenge.

WEIGHT

Weight challenges are minimized with the VMAC G30, which weighs 50% less* than other competitive air compressors. Weighing just 205 lbs (93 kg), the G30 is over 200 lbs lighter. Not only does every pound of GVW count when building a truck service body, especially because vehicle weight restrictions vary by state, but the Environmental Protection Agency reports that for every 100 lbs of weight reduction, a vehicle’s fuel economy can increase by up to 2%. This means that with 200lbs less weight, the VMAC G30 can save you up to 4% in truck fuel costs.

*Compared to competing 22 to 30 CFM reciprocating gas engine driven air compressors, with 30-gallon air receiver tank.

OPERATING IN COLD TEMPERATURES

Respondents in Canada and the Northeast and Midwestern states noted operating air compressors in cold temperatures to be particularly challenging. To ensure the air compressor can operate in extreme cold, a cold climate kit can be installed on the G30. The G30 with cold climate kit is proven to start-up at temperatures of -30°C (-22°F).**

**Due diligence and additional care may be required for prolonged operation in temperatures reaching below -15°C (5°F).

TRANSFERABILITY

The VMAC G30’s lightweight and compact design makes it easier to transfer than heavier air compressors weighing over 400 lbs. The lifting hook makes for easy installation on the service truck as well.

MAINTENANCE

The VMAC G30 is easy to maintain, with servicing recommended every 200 hours or every 6 months. The compressor is oil injected; oil forms a seal between the rotors so they don’t wear against each other. The G30 compressor doesn’t contain any gears, reed-valves, piston rings, or components that will fatigue or become fouled, which means with proper servicing and operation, the compressor should never require rebuilding. The G30 comes with a VMAC Lifetime Limited Warranty, and the reliable Honda GX390 engine comes with a 3-year warranty (limited).

OPERATING IN HOT TEMPERATURES

Operating air compressors in hot temperatures was a concern for some operators and fleet managers, predominately those located in areas like Texas, Virginia, Arizona, and California. The G30 is proven to operate at temperatures up to 40°C (104°F) and is protected by a compressor oil temperature switch that opens at 140°C (284°F) and shuts down and disables the engine until the oil temperature drops below 139°C (282°F).

MINIMIZE CHALLENGES WITH THE VMAC G30

Each of these seven challenges can be addressed with upgrading your air compressor to the VMAC G30 Gas Engine Driven Air Compressor. Not only is it 50% smaller, 50% lighter, and 50% more powerful, but it is also proven to operate in the most extreme climates. It’s also easy to transfer and maintain, allowing you to spend your time on the job, not struggling with your equipment.

Learn more about the VMAC G30, or find a dealer. You can also find a VMAC Sales Rep—they’ll be happy to answer your questions, and provide you with a demo of the air compressor, so you can see the G30 in action for yourself.

BIT Inspection Program California Bit Inspection CHP DOT

California BIT Inspection Program Explained. www.calbit.com

Tommy Gate Rear Camera Kits

Tommy Gate now has a new Rear Camera Sensor Bar Option  for Ford Superduty pickup liftgates.

The incorporation of rear camera technology in modern pickup trucks has rapidly increased over the past couple of years. According to a DOT mandate passed in 2014, all vehicles under 10,000lbs must be outfitted with the technology by May 2018.

In order to maximize liftgate versatility and compatibility with such technology, the Tommy Gate engineering team has designed a one-of-a-kind Rear Camera & Sensor Bar kit for many newer model trucks.

The application chart that lists available kits and their corresponding truck models has been updated to include some Ford Superduty models and may be viewed here.

Rear Camera Bar kits are application specific and only available for the newest pickup models. Tommy Gate will continue to release additional applications as future pickup models are released.

If you have any questions, feel free to contact your territory manager and/or customer service at 1-800-LIFTGATE.

Tommy Gate is always working to design, build, and improve upon the finest liftgates in the world.

What Spreader is Right for the Job?

No two ice removal jobs are the same, and that is why we offer multiple options to meet your specific needs. With a variety of features to back you up in your ice control efforts, confusion may arise regarding which BOSS spreader is right for you. Below is a description of the similarities and key differences between the FORGE and VBX spreaders to assist you in your decision!

Hopper Capacity: The VBX line offers multiple hopper capacity options to fit your needs – 1.5, 2, and 3 cubic yard capacity

Enclosed Spinner Motor: With a ¾ horsepower stainless steel spinner motor, the VBX gives you all the power you need without the maintenance of a gas-powered feed system. Also, the spinner motor is weather and dust sealed to ensure performance, durability, and reliability.

Hopper Material: The double-walled Polyethylene hopper provides a spreader that is durable, corrosion resistant, and low maintenance.

Standard Tarp: The VBX comes standard with a tarp to protect your de-icing materials from snow and moisture on the job.

LCD Screen In-Cab Controller: To make your life even easier, BOSS has equipped the VBX with an in-cab LCD display controller that allows you to manage spreader functions at the touch of a button. The LCD screen is backlit for clear visibility and ease of use.

LED Work Lights: BOSS knows that many ice removable jobs take place after normal hours, so LED work lights are a standard feature that illuminate the spreader at night.

Spinner Assembly: In addition to the swing-out feature on the spinner assembly – which makes for an easy removal of excess material – the VBX allows for further spinner customization. Users can easily adjust the height of the spinner to set their desired spreading range.

Additional Accessories:
Pre-Wet Ready: New VBX purchases come standard as Pre-Wet ready spreaders. Learn more about adding a Pre-Wet System to your spreader HERE.

Pro-Lid: VBX spreaders now have the option of adding a weather-sealed, poly-hard cover to protect deicing materials. Pro-Lid retrofits to existing VBX models and is available on the VBX6500, VBX8000, and VBX9000. Learn more about adding the Pro-Lid to your VBX HERE.

FORGE 2.0

Hopper Capacity: The FORGE 2.0 spreader is only available in one size – 2 cubic yard capacity with a minimum bed length required of 6’6.”

Enclosed Spinner Motor: The FORGE is equipped with a ½ horsepower drive motor. Like the VBX spinner motor, the FORGE motor is weather and dust sealed to ensure durability, performance, and reliability.

Hopper Material: Using heavy gauge stainless steel, the Forge provides a strong body that is less susceptible to damage and better prepared to take on the winter elements.
In-Cab Controller: The Forge features a high value in-cab controller that is backlit for clear visibility and ease of use.

Spinner Assembly: The FORGE also provides a swing out spinner assembly to allow for the emptying of old materials.

Additional Accessories
Customizable Features: BOSS allows you to customize features to fit your needs. Optional accessories include the Forge light kit, tarp, vibrator, and inverted V (pintle).

Pre-Wet Capable: The FORGE is pre-wet capable if desired. In order to add the Pre-Wet System, a Pre-Wet capable controller is required. To learn more, visit bossplow.com

Similarities
Though the VBX and FORGE 2.0 spreaders each contain unique features, BOSS has equipped both spreaders with similar features that are necessary to battle the winter elements.

Tie Down Kit: Both spreaders come standard with a tie down kit that keeps your spreader safe and secure in the bed of your truck.

Standard Top Screen: The VBX and FORGE both come standard with a top screen that prevents any large clumps of material from entering the spreader.

Dump Switch: After your ice removal job is completed, the VBX and FORGE both feature a dump switch that empties excess material effortlessly.

Inverted V Auger System: The inverted V auger system comes standard on both spreaders, and is optional on the pintle chain system. Only the auger feed system comes standard with a vibrator to assist in material movement, as the pintle feed design rarely requires this feature.

As with any purchase, taking the time to understand each product will help you select the spreader that best suits your needs. Contact your local dealer today for further questions and inquiries.
Topics: Buyer's Guide

Learn more at: http://info.bossplow.com

HOW LUBE TRUCKS INCREASE EFFICIENCY

LUBE TRUCKS have become some of the most important tools that a construction, demolition, or mining company can invest in. These support vehicles are capable of keeping even the largest fleets of work trucks and other machines stocked with the lubricants, antifreeze, grease, and other fluids that they need for maximum efficiency and effectiveness. Here are a few of the main benefits that lube trucks have to offer:

Learn more at: http://www.taylorpumpandlift.com/products/lube-trucks/

Come Visit Our Booth Fleet Con

• We will be at the Fleet Con on Sep 10-12 in Sparks, Nevada come visit our booth. Here is a link for how to attend: http://www.fleetcon.org/attendees

• NorCal Ford Truck Club Event: we look forward to seeing our NorCal Ford Truck Dealers, here is a link for more info https://ncftc.com/club-events/

Steel Dump Body With Removable Chipper Canopy - Enoven Truck Body

Hunter with Enoven Truck Body showcases a unique dump body with a removable chipper top. See more at http://www.enovenind.com

Switch-N-Go™: S-Model

Switch-N-Go’s™ S-Model system is designed to work on medium duty work trucks with room for little or no overhang. Equipping your truck with a Switch-N-Go™ S-Model your truck has all the benefits of the Switch-N-Go™ system with the bonus of no frame overhang which allows for easier towing.

Available in 9’, 10’ and 11’ versions the S-Model has all of the features of the Original Switch-N-Go™ body changing system, plus the added benefit of no frame overhang.

The S-Model is designed to run with electronically powered hydraulics.  This saves you the expense of adding a power take-off and pump to your automatic transmission.  The system is offered with 12,000 or 15,000 pound pull capacity winches.  The Switch-N-Go™ system has all of the benefits of a dump body as the scissor hoist will achieve a 50-degree dump angle, which is perfect for dumping mulch, asphalt, compacted soil, and more, dumping upwards of 10 tons.  The system is designed for trucks with a GVWR of 13,000 – 26,000 lbs.

Are you a new owner of a Switch-N-Go™ system or do you have a new employee to train on how to use the Switch-N-Go™ system?  If so, check out the How to use the Switch-N-Go™ system video on YouTube.

Additionally, if you have recently purchased a Switch-N-Go™ system or do you have a new employee we recommend that you watch the following instructional videos:

 - Lubing the wire rope

 - Checking the electrical connections

 - Warn winch connections

 - Greasing your Switch-N-Go

 - Using the wire rope

 - Tighten the side rollers

 - Using the body locks


Find out more at: http://www.switchngo.com

DECKED 101 | (Almost) Everything You Need to Know about DECKED

This is a deep dive into DECKED pickup truck and cargo van storage systems : exploring what it does for the customer, how it's constructed, its features and benefits, as well as assembly/installation best practices. While this is intended for DECKED retailers this is also a helpful guide for interested customers as well.

For more info on DECKED visit https://decked.com/

SIRIUS COMBI AST S-4902

EPOKE Sirius Combi AST S-4802 at work.

Learn more at: http://www.epokena.com/products/bulk-spreaders/s49004902-sirius-ast-combi/

BOSS Forge Spreaders

• Stainless steel hopper spreader available in both pintle and auger feed systems.
• 1.0 and 1.5 cubic yard capacity.
• Pre-wet compatible.
• FORGE 1.0 available for 1/2 Ton and 3/4 Ton trucks with a minimum bed length of 5'6".
• FORGE 1.5 available for 3/4 Ton and 1 Ton trucks with a minimum bed length of 6'6"