Dump Body Maintenance Tips - Enoven E10 Dump Body - Enoven Truck Body

AJ with Enoven Truck Body goes over some key items to check to maintain your dump body properly. See more about Enoven Truck Bodies at https://www.enoven.com

ENOVEN EWD 60 Dump Body

 

BODY: 9’6” Long, 3.4 to 4.6 cubic yard capacity; 16” tall sides with 22” tall tailgate (100% continuous welded); 50,000 PSI high strength steel throughout

FRONT END: 40” integral one-piece bulkhead with pressed horizontal stiffener and tapered ¼ cab shield, window cut-out, and full-depth front corner pillars; 10 gauge 50,000 PSI high strength steel

SIDES: 12 gauge 50,000 PSI high strength steel, fold down sides with three (3) hidden greaseable hinges, (3) bend dirt shedding top rail with 2” I.D. board pockets front and rear, sloping bottom rail, and no vertical or horizontal braces. Single lever locking cam over mechanism with lever and connecting rods boxed in. Fixed sides also available

TAILGATE: 10 gauge 50,000 PSI high strength steel inner panel and 12 gauge 50,000 PSI high strength steel outer panel. Top of the tailgate to be dirt shedding with manual tailgate release, standard 2-way operation, quick release levers on each rear corner post, overlock hardware, and 5/16” drop and spreader chains

TAILGATE HARDWARE: Over center locking hardware with a manual handle at the left front of the body

FLOOR: 7 gauge A1011 steel (2) bend floor with 6” deep rear apron at the rear of the body

UNDERSTRUCTURE: 7” tall 7 gauge grade 50 steel one-piece trapezoidal long sills, crossmemberless design

LIGHT SYSTEM: Recessed grommet mounted rear marker/clearance lamps in rear corner posts, angled. Three lamp ID bar above rear hitch

PAINT: Sandblasted, prepped, and cleaned. Primer painted with high impact resistant urethane light gray primer with a top coat of single-stage urethane paint

See more at Enoven.com

BOSS DXT in Action | BOSS Snowplow

Extreme conditions demand cutting edge innovation. The durable, fully featured BOSS DXT is the ultimate tool to fight all things snow and ice. The DXT combines both trip-edge and full moldboard trip technologies for high and low trip protection when striking obstacles like frozen snowbanks, manhole covers and curbs. Flared wings with enhanced curl throw snow with maximum efficiency and the DXT's multi-position plow blade can quickly and easily switch positions to move large amounts of snow.

• Patented Dual-Trip Design combines trip-edge and full moldboard trip technologies enhancing plow protection when striking hidden obstacles no matter your plow's position.
• SmartLight 3uses DOT- compliant 100% LED lights and Ice Shield Technology to prevent snow and ice build-up.
• 1/2" x 6" Long-Lasting, Durable Base Angle to provide extended wear resistance and comes with built-in curb guards and a patented snow catcher.
• NEW! D-Force Keep your blade in contact with the pavement with optional D-Force.

Enoven Truck Body is an authorized Boss Snow Products distributor. See more at Enoven.com

Steel Dump Body With Removable Chipper Canopy - Enoven Truck Body

Hunter with Enoven Truck Body showcases a unique dump body with a removable chipper enclosure.  See more at https://www.enovenind.com

Snowplow Truck Godwin Stainless Steel Body With Henke Spreader - Enoven Truck Body

AJ with Enoven Truck Body gives a quick overview of a Nevada State snowplow.  It features a stainless steel Godwin dump body and a Henkey spreader.  See more at https://www.enovenind.com

SmithCo Side Dump Body Demonstration - Enoven Truck Body

Sam with Enoven Truck Body shows off the Smithco Side Dump Body, which can dump to either side of the truck very quickly and easily.  See more at https://www.enoven.com

New Landscape Body With Side Access Doors - Enoven Truck Body

Hunter with Enoven Truck Body shows off their new landscape body.

See more at http://www.enoven.com