Cummins kicks off its centennial celebration with a simple message: “Challenge the Impossible.”
Thursday, February 28, 2019
Tuesday, February 26, 2019
Green Truck Summit at the 2019 Work Truck Show
When and where
Tuesday, March 5JW Marriott Indianapolis
8:30 a.m.–5 p. m.
Green Truck Summit & Fleet Technical Congress Conference & Trade Show Package registrants have the opportunity to attend March 5 general sessions for both events as well as Work Truck Show concurrent sessions on March 5–7.
Learn more at: http://www.worktruckshow.com/greentrucksummit
Sunday, February 24, 2019
VMAC G30 SOLVES COMMON AIR COMPRESSOR CHALLENGES
To celebrate the recent launch of the VMAC G30 Gas Engine Driven Air Compressor, now powered by Honda, VMAC ran a G30 Giveaway Contest. (Watch the video on our Facebook page!) In this contest we asked entrants to answer three simple questions. One of these questions asked fleet managers and operators what their top challenges with their current truck-mounted air compressors are. Here are the results:
Common Air Compressor Challenges
With seven options to choose from, the top three results were size, air output and weight, accounting for almost 60% of the responses. The VMAC G30 was designed and engineered to address the concerns fleet managers and operators have with their current equipment.
SIZE
VMAC G30 Gas Drive Air CompressorAir compressor size was the number one challenge our survey identified. The VMAC G30 is 50% smaller* than other competitive air compressors, measuring just 34” (l) x 21.5” (w) x 24” (h), making it small enough to fit on the side pack of a single rear wheel service body. The compact size frees up to 15 cubic feet on the truck body, and leaves more room in the back of the truck for supplies, tools, and equipment. Another bonus is that visibility is improved, as the short height of the G30 means it won’t obstruct the view in the rear window.
AIR OUTPUT
Not only is the G30 compact, it is also powerful—50% more powerful* than other competitive air compressors. Producing 30 CFM 100% of the time, the G30 can operate at 100% duty cycle, which means you won’t have to wait for air to build, and you can work without interruption, thanks to continuous air supply. The G30 doesn’t need a large air receiver tank either, which aids in the size challenge.
WEIGHT
Weight challenges are minimized with the VMAC G30, which weighs 50% less* than other competitive air compressors. Weighing just 205 lbs (93 kg), the G30 is over 200 lbs lighter. Not only does every pound of GVW count when building a truck service body, especially because vehicle weight restrictions vary by state, but the Environmental Protection Agency reports that for every 100 lbs of weight reduction, a vehicle’s fuel economy can increase by up to 2%. This means that with 200lbs less weight, the VMAC G30 can save you up to 4% in truck fuel costs.
*Compared to competing 22 to 30 CFM reciprocating gas engine driven air compressors, with 30-gallon air receiver tank.
OPERATING IN COLD TEMPERATURES
Respondents in Canada and the Northeast and Midwestern states noted operating air compressors in cold temperatures to be particularly challenging. To ensure the air compressor can operate in extreme cold, a cold climate kit can be installed on the G30. The G30 with cold climate kit is proven to start-up at temperatures of -30°C (-22°F).**
**Due diligence and additional care may be required for prolonged operation in temperatures reaching below -15°C (5°F).
TRANSFERABILITY
The VMAC G30’s lightweight and compact design makes it easier to transfer than heavier air compressors weighing over 400 lbs. The lifting hook makes for easy installation on the service truck as well.
MAINTENANCE
The VMAC G30 is easy to maintain, with servicing recommended every 200 hours or every 6 months. The compressor is oil injected; oil forms a seal between the rotors so they don’t wear against each other. The G30 compressor doesn’t contain any gears, reed-valves, piston rings, or components that will fatigue or become fouled, which means with proper servicing and operation, the compressor should never require rebuilding. The G30 comes with a VMAC Lifetime Limited Warranty, and the reliable Honda GX390 engine comes with a 3-year warranty (limited).
OPERATING IN HOT TEMPERATURES
Operating air compressors in hot temperatures was a concern for some operators and fleet managers, predominately those located in areas like Texas, Virginia, Arizona, and California. The G30 is proven to operate at temperatures up to 40°C (104°F) and is protected by a compressor oil temperature switch that opens at 140°C (284°F) and shuts down and disables the engine until the oil temperature drops below 139°C (282°F).
MINIMIZE CHALLENGES WITH THE VMAC G30
Each of these seven challenges can be addressed with upgrading your air compressor to the VMAC G30 Gas Engine Driven Air Compressor. Not only is it 50% smaller, 50% lighter, and 50% more powerful, but it is also proven to operate in the most extreme climates. It’s also easy to transfer and maintain, allowing you to spend your time on the job, not struggling with your equipment.
Learn more about the VMAC G30, or find a dealer. You can also find a VMAC Sales Rep—they’ll be happy to answer your questions, and provide you with a demo of the air compressor, so you can see the G30 in action for yourself.
Friday, February 22, 2019
Fleet Technical Congress ar 2019 Work Truck Show
Fleet Technical Congress presents strategies and processes to help fleet managers take advantage of the technology revolution and find creative solutions to enhance fleet operations.
Key topics
- Disaster recovery planning
- Strategies to secure fuel supplies
- Using data to design work trucks
- Ensuring a reliable fleet power supply
- Last-mile delivery
Wednesday, February 20, 2019
What Spreader is Right for the Job?
No two ice removal jobs are the same, and that is why we offer multiple options to meet your specific needs. With a variety of features to back you up in your ice control efforts, confusion may arise regarding which BOSS spreader is right for you. Below is a description of the similarities and key differences between the FORGE and VBX spreaders to assist you in your decision!
Hopper Capacity: The VBX line offers multiple hopper capacity options to fit your needs – 1.5, 2, and 3 cubic yard capacity
Enclosed Spinner Motor: With a ¾ horsepower stainless steel spinner motor, the VBX gives you all the power you need without the maintenance of a gas-powered feed system. Also, the spinner motor is weather and dust sealed to ensure performance, durability, and reliability.
Hopper Material: The double-walled Polyethylene hopper provides a spreader that is durable, corrosion resistant, and low maintenance.
Standard Tarp: The VBX comes standard with a tarp to protect your de-icing materials from snow and moisture on the job.
LCD Screen In-Cab Controller: To make your life even easier, BOSS has equipped the VBX with an in-cab LCD display controller that allows you to manage spreader functions at the touch of a button. The LCD screen is backlit for clear visibility and ease of use.
LED Work Lights: BOSS knows that many ice removable jobs take place after normal hours, so LED work lights are a standard feature that illuminate the spreader at night.
Spinner Assembly: In addition to the swing-out feature on the spinner assembly – which makes for an easy removal of excess material – the VBX allows for further spinner customization. Users can easily adjust the height of the spinner to set their desired spreading range.
Additional Accessories:
Pre-Wet Ready: New VBX purchases come standard as Pre-Wet ready spreaders. Learn more about adding a Pre-Wet System to your spreader HERE.
Pro-Lid: VBX spreaders now have the option of adding a weather-sealed, poly-hard cover to protect deicing materials. Pro-Lid retrofits to existing VBX models and is available on the VBX6500, VBX8000, and VBX9000. Learn more about adding the Pro-Lid to your VBX HERE.
FORGE 2.0
Hopper Capacity: The FORGE 2.0 spreader is only available in one size – 2 cubic yard capacity with a minimum bed length required of 6’6.”
Enclosed Spinner Motor: The FORGE is equipped with a ½ horsepower drive motor. Like the VBX spinner motor, the FORGE motor is weather and dust sealed to ensure durability, performance, and reliability.
Hopper Material: Using heavy gauge stainless steel, the Forge provides a strong body that is less susceptible to damage and better prepared to take on the winter elements.
In-Cab Controller: The Forge features a high value in-cab controller that is backlit for clear visibility and ease of use.
Spinner Assembly: The FORGE also provides a swing out spinner assembly to allow for the emptying of old materials.
Additional Accessories
Customizable Features: BOSS allows you to customize features to fit your needs. Optional accessories include the Forge light kit, tarp, vibrator, and inverted V (pintle).
Pre-Wet Capable: The FORGE is pre-wet capable if desired. In order to add the Pre-Wet System, a Pre-Wet capable controller is required. To learn more, visit bossplow.com
Similarities
Though the VBX and FORGE 2.0 spreaders each contain unique features, BOSS has equipped both spreaders with similar features that are necessary to battle the winter elements.
Tie Down Kit: Both spreaders come standard with a tie down kit that keeps your spreader safe and secure in the bed of your truck.
Standard Top Screen: The VBX and FORGE both come standard with a top screen that prevents any large clumps of material from entering the spreader.
Dump Switch: After your ice removal job is completed, the VBX and FORGE both feature a dump switch that empties excess material effortlessly.
Inverted V Auger System: The inverted V auger system comes standard on both spreaders, and is optional on the pintle chain system. Only the auger feed system comes standard with a vibrator to assist in material movement, as the pintle feed design rarely requires this feature.
As with any purchase, taking the time to understand each product will help you select the spreader that best suits your needs. Contact your local dealer today for further questions and inquiries.
Topics: Buyer's Guide
Learn more at: http://info.bossplow.com
Hopper Capacity: The VBX line offers multiple hopper capacity options to fit your needs – 1.5, 2, and 3 cubic yard capacity
Enclosed Spinner Motor: With a ¾ horsepower stainless steel spinner motor, the VBX gives you all the power you need without the maintenance of a gas-powered feed system. Also, the spinner motor is weather and dust sealed to ensure performance, durability, and reliability.
Hopper Material: The double-walled Polyethylene hopper provides a spreader that is durable, corrosion resistant, and low maintenance.
Standard Tarp: The VBX comes standard with a tarp to protect your de-icing materials from snow and moisture on the job.
LCD Screen In-Cab Controller: To make your life even easier, BOSS has equipped the VBX with an in-cab LCD display controller that allows you to manage spreader functions at the touch of a button. The LCD screen is backlit for clear visibility and ease of use.
LED Work Lights: BOSS knows that many ice removable jobs take place after normal hours, so LED work lights are a standard feature that illuminate the spreader at night.
Spinner Assembly: In addition to the swing-out feature on the spinner assembly – which makes for an easy removal of excess material – the VBX allows for further spinner customization. Users can easily adjust the height of the spinner to set their desired spreading range.
Additional Accessories:
Pre-Wet Ready: New VBX purchases come standard as Pre-Wet ready spreaders. Learn more about adding a Pre-Wet System to your spreader HERE.
Pro-Lid: VBX spreaders now have the option of adding a weather-sealed, poly-hard cover to protect deicing materials. Pro-Lid retrofits to existing VBX models and is available on the VBX6500, VBX8000, and VBX9000. Learn more about adding the Pro-Lid to your VBX HERE.
FORGE 2.0
Hopper Capacity: The FORGE 2.0 spreader is only available in one size – 2 cubic yard capacity with a minimum bed length required of 6’6.”
Enclosed Spinner Motor: The FORGE is equipped with a ½ horsepower drive motor. Like the VBX spinner motor, the FORGE motor is weather and dust sealed to ensure durability, performance, and reliability.
Hopper Material: Using heavy gauge stainless steel, the Forge provides a strong body that is less susceptible to damage and better prepared to take on the winter elements.
In-Cab Controller: The Forge features a high value in-cab controller that is backlit for clear visibility and ease of use.
Spinner Assembly: The FORGE also provides a swing out spinner assembly to allow for the emptying of old materials.
Additional Accessories
Customizable Features: BOSS allows you to customize features to fit your needs. Optional accessories include the Forge light kit, tarp, vibrator, and inverted V (pintle).
Pre-Wet Capable: The FORGE is pre-wet capable if desired. In order to add the Pre-Wet System, a Pre-Wet capable controller is required. To learn more, visit bossplow.com
Similarities
Though the VBX and FORGE 2.0 spreaders each contain unique features, BOSS has equipped both spreaders with similar features that are necessary to battle the winter elements.
Tie Down Kit: Both spreaders come standard with a tie down kit that keeps your spreader safe and secure in the bed of your truck.
Standard Top Screen: The VBX and FORGE both come standard with a top screen that prevents any large clumps of material from entering the spreader.
Dump Switch: After your ice removal job is completed, the VBX and FORGE both feature a dump switch that empties excess material effortlessly.
Inverted V Auger System: The inverted V auger system comes standard on both spreaders, and is optional on the pintle chain system. Only the auger feed system comes standard with a vibrator to assist in material movement, as the pintle feed design rarely requires this feature.
As with any purchase, taking the time to understand each product will help you select the spreader that best suits your needs. Contact your local dealer today for further questions and inquiries.
Topics: Buyer's Guide
Learn more at: http://info.bossplow.com
Monday, February 18, 2019
Enoven Truck Body offers the full lineup of Boss Snow Plows and Spreaders
We can upfit your existing vehicle or build out a full ready to work snow plow vehicle with spreaders and all.
Take a look at the product catalog from the Boss Brochure: http://enovenind.com/wp-content/uploads/2017truck-equipment-brochure.pdf
Call us today for a quote.
(916) 372-9692
Enoven Truck Body and Equipment
2904 Duluth Street
W. Sacramento, CA 95691
Saturday, February 16, 2019
SmithCo Side Dump Body On Western Star Chassis With Attenuator - Enoven Truck Body
Sam with Enoven Truck Body shows off a Western Star Chassis mounted with a Smithco Side Dump Body and crash Attenuator. See more at http://www.enoven.com
Subscribe to:
Posts (Atom)