Tuesday, December 26, 2023

ENOVEN E-SERIES 7-9 Yard Dump Bodies

 



B
ODY: 10’ Long, 7.9 to 9.7 cubic yard capacity; 36” tall sides with 44” tall tailgate, 100% continuous welded

FRONT END: 36” tall 3/16” hi-tensile steel with 1” horizontal “V” brace, 20” cab protector, and 7ga hi-tensile steel full depth front corner pillars

SIDES: 36” tall 10 gauge hi-tensile steel outer panel with 3/16” hi-tensile steel inner panel. 6” sloping boxed top rail, 6” deep sloping bottom rail, 2” cheater board pockets, (2) horizontal “V” braces

TAILGATE: 44” tall 10 gauge hi-tensile steel outer panel with 3/16” hi-tensile steel inner panel. Dirt shedding top with the standard 2-way operation, (2) horizontal “V” braces, 3/8” drop and spreader chains, 11” X 19” patch gate, and 8” bolt-on spreader apron

TAILGATE HARDWARE: Over center locking hardware with a manual handle at the left front of the body

FLOOR: ¼” one-piece hi-tensile steel with radius from side to floor

UNDERSTRUCTURE8” tall structural channel long sills, crossmemberless design

LIGHT SYSTEM: 6” Oval LED recessed grommet mounted S/T/T lamp in rear posts with 3/4” LED rear clearance and 2.5” LED rear side marker lamps. Three lamp ID bar above the hitch plate

PAINT: Sandblasted, prepped, and cleaned. Primer painted with high impact resistant urethane light gray primer with a top coat of single-stage urethane paint

HOIST: Champion underbody, sub-frame mounted hoist. NTEA Class 60 rated at 22.1 tons with a 50-degree dump angle. Single body pro

See more at Enoven.com

No comments:

Post a Comment